Can't install GTA V, stucks on creating wine prefix

Hello everyone, I can’t install GTA 5 in lutris, I ran command lutris -d in terminal to see what stops lutris install the game, and i see the next.


After a couple of minutes, it says

ERROR    2024-08-12 13:20:47,848 [wine.create_prefix:173]:No user.reg found after prefix creation. Prefix might not be valid
ERROR    2024-08-12 13:20:47,848 [registry.__init__:85]:No registry file at /media/fluxmanch26/SGBarracuda2Tb/gtav/user.reg

ERROR    2024-08-12 13:20:47,848 [jobs.target:32]:Error while completing task <bound method CommandsMixin.task of <interpreter.ScriptInterpreter object at 0x7fe48188c280 (lutris+installer+interpreter+ScriptInterpreter at 0x56244c2d5120)>>: <class 'OSError'> Invalid Wine prefix path /media/fluxmanch26/SGBarracuda2Tb/gtav, make sure to create the prefix before saving to a registry
  File "/usr/lib/python3/dist-packages/lutris/util/jobs.py", line 30, in target
    result = self.function(*args, **kwargs)
  File "/usr/lib/python3/dist-packages/lutris/installer/commands.py", line 432, in task
    command = task(**data)
  File "/usr/lib/python3/dist-packages/lutris/runners/commands/wine.py", line 427, in winetricks
    return wineexec(
  File "/usr/lib/python3/dist-packages/lutris/runners/commands/wine.py", line 355, in wineexec
    runner.prelaunch()
  File "/usr/lib/python3/dist-packages/lutris/runners/wine.py", line 1022, in prelaunch
    self.set_regedit_keys()
  File "/usr/lib/python3/dist-packages/lutris/runners/wine.py", line 966, in set_regedit_keys
    prefix_manager.clear_registry_subkeys(path, key)
  File "/usr/lib/python3/dist-packages/lutris/util/wine/prefix.py", line 133, in clear_registry_subkeys
    registry.save()
  File "/usr/lib/python3/dist-packages/lutris/util/wine/registry.py", line 156, in save
    raise OSError(
ERROR    2024-08-12 13:20:47,848 [interpreter._iter_commands:300]:Last install command failed, show error

Im using Linux Mint 21.1 Cinnamon DE
I used wine-ge 8-26 to install the game
Can anyone help me with this? i had no problems with installing gta v on debian with lutris installer, but here i have them
thanks in advance

I suggest you follow my comments in the thread below, there are 5 things I would make sure they’re up to date (WineHQ, BIOS, Kernel, Desktop, Drivers) and then try again:

Thanks for the reply, everything is up to date, bios, video drivers, kernel, desktop, but still can’t install the games, i mean, i installed Watch Dogs 2 without any problems on the same Wine build (Wine-GE 8-26) and it runs flawlessly. I installed Fedora 40, problem is still occurs. And again, everything is up-to-date, and used same Wine Build, but i tried another one (lutris-7.2-2), still stops on “Creating 64-bit Wine Prefix”
I just saw that folder with Wine prefix and where is game should be installed, just deletes itself right after saying “creating 64-bit wine prefix”


I’ll post inxi -Fxxz output here

fluxmanch26@h410mh:~$ inxi -Fxxz
System:
  Kernel: 6.10.3-200.fc40.x86_64 arch: x86_64 bits: 64 compiler: gcc
    v: 2.41-37.fc40
  Desktop: GNOME v: 46.4 tk: GTK v: 3.24.43 wm: gnome-shell dm: GDM
    Distro: Fedora Linux 40 (Workstation Edition)
Machine:
  Type: Desktop System: Gigabyte product: H410M H v: N/A
    serial: <superuser required>
  Mobo: Gigabyte model: H410M H serial: <superuser required>
    UEFI: American Megatrends v: F7 date: 06/07/2023
Battery:
  Device-1: hidpp_battery_0 model: Logitech G304 Lightspeed Wireless Gaming
    Mouse serial: <filter> charge: 55% (should be ignored) status: discharging
CPU:
  Info: 6-core model: Intel Core i5-10400F bits: 64 type: MT MCP
    arch: Comet Lake rev: 3 cache: L1: 384 KiB L2: 1.5 MiB L3: 12 MiB
  Speed (MHz): avg: 2760 high: 4099 min/max: 800/4300 cores: 1: 4099 2: 3975
    3: 4079 4: 800 5: 800 6: 4099 7: 800 8: 4015 9: 3054 10: 4066 11: 2543
    12: 800 bogomips: 69597
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] driver: nvidia v: 555.58.02
    arch: Pascal pcie: speed: 2.5 GT/s lanes: 16 ports: active: none off: DP-1
    empty: DVI-D-1,HDMI-A-1 bus-ID: 01:00.0 chip-ID: 10de:1c82
  Display: x11 server: X.Org v: 1.20.14 with: Xwayland v: 24.1.2
    compositor: gnome-shell driver: X: loaded: nvidia unloaded: modesetting
    alternate: fbdev,nouveau,nv,vesa gpu: nvidia,nvidia-nvswitch
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96
  Monitor-1: DP-1 mapped: DP-0 note: disabled model: AOC 25G3ZM
    res: 1920x1080 dpi: 90 diag: 623mm (24.5")
  API: OpenGL v: 4.6.0 vendor: nvidia v: 555.58.02 glx-v: 1.4
    direct-render: yes renderer: NVIDIA GeForce GTX 1050 Ti/PCIe/SSE2
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: Intel Comet Lake PCH-V cAVS vendor: Gigabyte driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a3f0
  Device-2: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel
    v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0fb9
  Device-3: Razer USA Barracuda X 2.4
    driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
    lanes: 1 bus-ID: 1-9:8 chip-ID: 1532:0552
  API: ALSA v: k6.10.3-200.fc40.x86_64 status: kernel-api
  Server-1: JACK v: 1.9.22 status: off
  Server-2: PipeWire v: 1.0.7 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Gigabyte driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1
    port: 4000 bus-ID: 02:00.0 chip-ID: 10ec:8168
  IF: enp2s0 state: down mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: 3000
    bus-ID: 03:00.0 chip-ID: 10ec:8161
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-3: Realtek RTL8188EUS 802.11n Wireless Network Adapter
    driver: rtl8xxxu type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 1-5:3
    chip-ID: 0bda:8179
  IF: wlp0s20f0u5 state: down mac: <filter>
Bluetooth:
  Device-1: TP-Link TP-Han+ UB500 Adapter driver: btusb v: 0.8 type: USB
    rev: 1.1 speed: 12 Mb/s lanes: 1 bus-ID: 1-6:5 chip-ID: 2357:0604
  Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: <filter> bt-v: 5.1 lmp-v: 10
Drives:
  Local Storage: total: 2.73 TiB used: 300.38 GiB (10.7%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 EVO Plus 500GB
    size: 465.76 GiB speed: 31.6 Gb/s lanes: 4 serial: <filter> temp: 49.9 C
  ID-2: /dev/sda vendor: Seagate model: ST500DM002-1BD142 size: 465.76 GiB
    speed: 6.0 Gb/s serial: <filter>
  ID-3: /dev/sdb vendor: Seagate model: ST2000DM008-2UB102 size: 1.82 TiB
    speed: 6.0 Gb/s serial: <filter>
Partition:
  ID-1: / size: 39.08 GiB used: 13.87 GiB (35.5%) fs: ext4 dev: /dev/nvme0n1p1
  ID-2: /boot/efi size: 1022 MiB used: 19 MiB (1.9%) fs: vfat
    dev: /dev/nvme0n1p3
  ID-3: /home size: 401.27 GiB used: 10.54 GiB (2.6%) fs: ext4
    dev: /dev/nvme0n1p4
Swap:
  ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
  ID-2: swap-2 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p2
Sensors:
  System Temperatures: cpu: 46.0 C mobo: 39.0 C gpu: nvidia temp: 41 C
  Fan Speeds (rpm): N/A gpu: nvidia fan: 40%
Info:
  Memory: total: 32 GiB available: 31.26 GiB used: 4.09 GiB (13.1%)
  Processes: 375 Power: uptime: 29m wakeups: 0 Init: systemd v: 255
    target: graphical (5) default: graphical
  Packages: Compilers: gcc: 14.2.1 Shell: Bash v: 5.2.26
    running-in: gnome-terminal inxi: 3.3.34

maybe its an installer problem? cuz i never had this thing before, two months ago i could install it without any problems, and it was on the same system that i use right now.